TM 5-3805-293-23-2
0026
Table 1. Implement Code (0041-03 to 0600-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0358-03 Implement Pilot
5. Using the MSD (WP 0006), select 0358-03 Code Active - Repeat
Pressure Supply Solenoid
Implement 120M and verify 0358- troubleshooting code from the
Voltage Above Normal -
03 is not active.
beginning.
Continued
0358-03 Code Not Active -
Troubleshooting complete.
Test Step 3. Test for Shorted Rear
Chassis Wiring Harness.
1. Disconnect the rear chassis wir-
ing harness connector FA-C22
(WP 0009, Figure 47) from cab
lower wiring harness connector P-
C69 (WP 0009, Figure 46) (WP
0188).
2. Using digital multimeter, measure
Continuity - Proceed to Test Step 4.
for continuity between rear chas-
No Continuity- Replace cab lower
sis wiring harness connector FA-
wiring harness (WP 0266).
C22 (WP 0009, Figure 47) termi-
Connect the hydraulic valve wiring
nal 31 and all other FA-C22 termi-
harness connector AP-C3 (WP 0009,
nals.
Figure 215) to implement pilot
There should be no continuity.
pressure supply solenoid (WP 0009,
Figure 216).
Proceed to step 3.
3. Using the MSD (WP 0006), select 0358-03 Code Active - Repeat
Implement 120M and verify 0358- troubleshooting code from the
03 is not active.
beginning.
0358-03 Code Not Active -
Troubleshooting complete.
Test Step 4. Test for Shorted Rear
Chassis Wiring Harness.
1. Disconnect the hydraulic valve
wiring harness connector AP-C1
(WP 0009, Figure 213) from rear
chassis wiring harness connector
FA-C30 (WP 0009, Figure 211).
0026-49
