TM 5-3805-293-23-2
0042
TEST 2 POSITIVE BATTERY CABLE CONTINUED
00042
3. Using digital multimeter, measure voltage between positive post of junction (Figure 9, Item 3) on left side of
machine and machine ground (Figure 9, Item 1). Voltage should not be less than 1 volt of value recorded in
step 1.
a. If voltage is less than 1 volt of value recorded in step 1, replace positive battery cable (Figure 9, Item 2)
(WP 0195). End of Task.
b. If voltage is equal to value recorded in step 1, proceed to step 4.
Figure 9. Left Side Positive Battery Cable Junction.
0042