TM 5-3805-293-23-2
0027
Table 1. Implement Code (0615-02 TO 2113-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0650-02 Implement 2 ECM
3. Disconnect harness connector
Harness Code Data Erratic,
FA-C22 (WP 0009, Figure 47)
Intermittent or Incorrect
from harness connector P-C69
Data - Continued
(WP 0009, Figure 46) (WP 0188).
4. Install a jumper wire between har-
ness connector FA-C22 (WP
0009, Figure 47) terminals 64 and
terminal 65.
5. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 6.
nector FA-C20 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
113) terminal 10 and terminal 20.
Replace rear chassis wiring harness
Resistance should be less than
(WP 0188).
5.0 ohms.
Connect cab lower wiring harness
connector P-C93 (WP 0009, Figure
163) to messenger (WP 0009, Figure
164) (WP 0272).
Proceed to step 9.
6. Remove jumper wire from har-
ness connector FA-C22 (WP
0009, Figure 47) terminals 64 and
terminal 65.
7. Using digital multimeter, test for
Continuity - Replace rear chassis
continuity between harness con-
wiring harness (WP 0188).
nector FA-C20 (WP 0009, Figure
Connect cab lower wiring harness
113) terminal 10 and all other ter-
connector P-C93 (WP 0009, Figure
minals on harness connector FA-
163) to messenger (WP 0009, Figure
C20.
164) (WP 0272)
There should be no continuity.
Proceed to step 9.
No Continuity - Proceed to step 8.
0027-38
