TM 5-3805-293-23-2
0027
Table 1. Implement Code (0615-02 TO 2113-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0615-14 Machine Articula-
Test Step 1. Verify if Code 0615-14
tion Angle Sensor Special
is Active.
Instruction - Continued
1. Connect MSD (WP 0006), select
0615-14 Code Active - Proceed to
Trans/Chassis 120M and verify
Test Step 2.
0615-14 is active for the transmis-
0615-14 Code Not Active -
sion ECM or the Implement 1
Troubleshooting complete.
ECM.
Test Step 2. Inspect Sensor and
Linkage.
1. Inspect articulation angle position
sensor 1 (left) (WP 0009, Figure
145) and linkage for the following:
a. Linkage securely connected
Linkage Loose or Sensor Not
to machine and to sensor.
Secure - Perform installation and
adjustment procedure for articulation
angle position sensor 1 (left) (WP
0257).
Proceed to step 2.
b. Remove articulation angle
Sensor Damaged - Replace
position sensor 1 (left) and
articulation angle position sensor 1
visually inspect sensor hous-
(left) (WP 0257).
ing, and harness connector
Proceed to step 2.
for damage (WP 0257).
c.
Linkage bent or damaged.
Linkage Bent or Damaged - Replace
articulation angle position sensor 1
(left) linkage and perform adjustment
(WP 0257).
Proceed to step 2.
Sensor and Linkage OK - Proceed to
Test Step 3.
2. Using MSD (WP 0006), verify
0615-14 Code Active - Proceed to
0615-14 is active for the transmis-
Test Step 3.
sion ECM or the Implement 1
0615-14 Code Not Active -
ECM.
Troubleshooting complete.
Test Step 3. Check Sensor.
1. Verify articulation angle position
Articulation Angle Position Sensor
sensor 1 (left) is within specifica-
OK - Proceed to Test Step 4.
tions refer to Adjustment in WP
Articulation Angle Position Sensor
0257.
Needs Adjustment - Adjust sensor
as directed (WP 0257).
Proceed to step 2.
0027-35