TM 5-3805-263-14&P-3
VEHICLE SYSTEMS
BLADE LIFT BAR
5.
Fasten a hoist to blade lift bar (3). Put it in position
on blade lift arms (2). Install the washers between
the lift bar and the lift arms. Install the two pins that
hold the lift bar. Make sure the grooves in the pins
are in alignment with the openings in the lift arms.
6.
Put the locks in position in the openings in the lift
arms. Install the bolts that hold the locks.
7.
Fasten a hoist to centershift cylinder (7). Put it in
position on ballstud (5). Put the inserts in position
on cylinder rod (4) and cap (6). Put cap (6) in
position on the ball-stud. Install the bolts that hold
the cap to the cylinder rod.
8.
Put clip (8) in position on the lift bar. Install the bolt
that holds it. end by:
a) install centershift lock
3-199
