TM 53805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
BLADE LIFT BAR
INSTALL BLADE LIFT BAR
Tools Needed
A
B
C
1P1834
Pulling Adapter
1
1
9S5558
Stud
1
1
1P544
Nut
1
1
3H467
Washer
1
1
5H9817 Puller Assembly
1
1
5P3100
Pump Group (or electric)
1
1
1P510
Driver Group
1
1.
Install new bearings (1) in each end of the blade lift
bar with tooling (A). Install the bearings to a depth
of .406 + .016 in. (10.90 + .406 mm) from the
outside surfaces of the lift bar.
CAUTION
Tooling (A) must be used to install the bearings to
prevent damage.
2. Install the four new seals in each end of the lift bar
with tooling (B). Install with the lip of the seals
toward the outside of the bore. Install the seals
even with the outside surfaces of the lift bar.
3. Install the snap ring in the centershift lock bore of
the lift bar. Install the two bearings and the spacer
between the bearings with tooling (C). Install the
bearings and the spacer so they make contact with
the snap ring.
4. Install a new seal in the centershift lock bore of the
lift bar with tooling (B). Install the lip of the seal
toward the outside surface. Install the seal so it
makes contact with the snap ring.
3-198
