TM 5-3805-263-14&P-3
VEHICLE SYSTEMS
CENTERSHI FT LOCK CONTROL VALVE
REMOVE CENTERSHIFT LOCK CONTROL
VALVE
1
Release the air pressure in the air tank by loosening
the bleed valves.
Do not disconnect any airlines from the centershift
lock control valve until the air pressure is zero.
2.
Remove the cotter pin and pin (3) from linkage (5).
Move the linkage free of the handle. Remove bolts
(2) and retainer (1) from the cover. Remove bolts
(4) and cover (6).
3. Disconnect air lines (9) and (10) from the valve.
4. Remove screws (7). Remove centershift lock
control valve (8).
INSTALL CENTERSHIFT LOCK CONTROL
VALVE
1
Put centershift lock control valve (1) in position on
the support. Install the screws that hold it.
2. Connect the three air lines to their correct location
on the valve.
3. Put cover (2) in position on the brackets. Install the
bolts that hold it.
4. Put the retainer in position on cover (2). Install the
bolts that hold it.
5
Put linkage (3) in position on the handle. Install the
pin that holds it. Install the otter pin.
3-195
