TM 5-3805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
BLADE TIP CYLINDER
REMOVE BLADE TIP CYLINDER
1.
Put the blade in position as shown. Remove oil lines
(6) from the cylinder. Fasten a hoist to the cylinder.
2.
Remove cotter pin (1) from pin (5). Remove pin (5)
from the cylinder and the circle.
3.
Remove bolt (3) from pin (4). Remove pin (4) from
the cylinder and the blade assembly.
4.
Remove blade tip cylinder (2). Weight is 50 lb. (23
kg).
NOTE: See DISASSEMBLE AND ASSEMBLE
HYDRAULIC CYLINDERS.
INSTALL BLADE TIP CYLINDER
1.
Fasten a hoist to the cylinder. Put blade tip cylinder
(1) in position on the circle and the blade.
2.
Install the two pins that hold the cylinder on the
machine. Install the bolt that holds the pin to the
blade. Install the cotter pin that holds the pin to the
circle.
3.
Connect oil lines (2) to their correct locations on
3-204
