TM 5-3805-261-23-1
SUPPLEMENTAL STEERING HYDRAULIC PRESSURE SWITCH REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanic's (Item 89, WP 0348 00)
Machine parked on level ground (TM 5-3805-261-
Shop equipment, common no. 1 (Item 75, WP 0348
10)
Parking/emergency brake applied (TM 5-3805-261-
Wrench, torque (Item 97, WP 0348 00)
10)
Implements lowered to ground (TM 5-3805-261-
Materials/Parts
10)
Cap set, protective (Item 7, WP 0349 00)
Engine off (TM 5-3805-261-10)
Rag, wiping (Item 35, WP 0349 00)
Battery cables disconnected (WP 0125 00)
Hydraulic pressure relieved (WP 0021 00)
Packing, preformed (2)
WARNING
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause
injury to personnel.
CAUTION
Wipe area clean around hydraulic connection to be opened during removal. Cap oil line and plug opening
after removing line. Contamination of hydraulic system could result in premature failure.
NOTE
Use a container to catch any hydraulic oil that may drain from system. Dispose of oil in accordance with
local policy and ordinances. Ensure all spills are cleaned up.
