TM 5-3805-261-23-1
SUPPLEMENTAL STEERING PUMP VALVE SWITCH MAINTENANCE - CONTINUED
0086 00
INSTALLATION/ADJUSTMENT - CONTINUED
NOTE
Multimeter must indicate no continuity.
5.
Depress clevis (12) on left side of cab floor and check continuity across terminals of switch (5).
6.
Release clevis (12).
7.
Connect two wire assemblies (2) and install two washers (3) and screws (4) on switch (5).
8.
Connect hydraulic hose (as necessary) (WP 0323 00).
9.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0086 00-3
