TM 5-3805-261-23-1
SWITCH PANEL AND MOUNTING REPLACEMENT (CCE AND TYPE I MACHINES) - CONTINUED
0085 00
REMOVAL - CONTINUED
15
23
14
25
16
17
24
22
18
22
21
19
397-263
20
397-262
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install lighter (22) and barrel (24) on bracket (16).
2.
Install two switches (14 and 15), nuts (18), and nuts (17) on bracket (16).
NOTE
Place two leads of wiring harness that connect to two wire assemblies leading to light socket, through hole in
side of bracket.
3.
Connect wiring harness to switches (15 and 14) and lighter (22), install new lockwasher (23) and screw (25) to lighter,
and place bracket (16) into position.
4.
Install two bolts (21), new lockwashers (20), and nuts (19) securing bracket (16).
5.
Connect two wire assemblies (13) to leads of wiring harness coming out of hole in side of bracket (16), push connec-
tions through hole and install grommet (1).
6.
Install seal (2), socket (3), washer (11), and nut (12) on panel (10).
7.
Install two wire assemblies (13) to socket (3) and place panel (10) into position.
8.
Install two screws (8), button (9), lighter knob (7), lamp (5), lens (6), and two knobs (4).
9.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0085 00-3
