TM 5-3805-261-23-1
SUPPLEMENTAL STEERING GOVERNOR SWITCH MAINTENANCE - CONTINUED
0088 00
REMOVAL
NOTE
Tag wire assemblies before disconnecting to aid in installation.
1.
Remove two screws (24) and washers (23) and disconnect two wire assemblies (22) from switch (21).
2.
Loosen nut (20) and remove switch (21), preformed packing (19), and nut (20) from housing (5). Discard preformed
packing.
3.
Remove four bolts (1), washers (2), cover (3), and gasket (4) from housing (5). Discard gasket.
4.
Remove two bolts (18), washers (17), housing (5), and gasket (6) from cover (8). Discard gasket.
5.
Remove three bolts (7) and cover (8).
6.
Loosen nut (9) and remove adjusting screw (10) and nut from actuator (15).
7.
Remove nut (16), actuator (15), bolt (13), two spring-tension washers (12), and rod (14) from clevis (11). Discard
spring-tension washers.
11
10
12
8
9
7
13
6
5
14
4
15
3
16
2
1
19
20
17
18
21
22
397-266
24 23
0088 00-2
