TM 5-3805-261-23-1
SWITCH PANEL AND MOUNTING REPLACEMENT (CCE AND TYPE I MACHINES) - CONTINUED
0085 00
REMOVAL
1.
Remove two knobs (4), lens (6), lamp (5), lighter knob (7), button (9), and two screws (8) from switch panel (10) on
right side of cab.
NOTE
Tag all wire assemblies before disconnecting to aid in installation.
2.
Pull back panel (10), disconnect two wire assemblies (13) from socket (3) and remove panel.
3.
Remove nut (12), washer (11), socket (3), and seal (2) from panel (10).
4.
Remove grommet (1) and two wire assemblies (13).
3
2
4
1
56
13
7
10
9
8
12 11
397-261
5.
Remove two nuts (19), lockwashers (20), and bolts (21) and pull back bracket (16). Discard lockwashers.
6.
Remove screw (25) and lockwasher (23), disconnect wiring harness from lighter (22) and switches (14 and 15) and
remove bracket (16). Discard lockwasher.
7.
Remove two nuts (17), nuts (18), and switches (14 and 15) from bracket (16).
8.
Remove barrel (24) and lighter (22) from bracket (16).
0085 00-2
