TM 5-3805-261-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - CONTINUED
1. Ensure SER DRIVE or PARK
Select SER DRIVE or PARK. If
7.
Headlight(s)/Parking Light(s) Do Not
function has been selected on
problem still exists, go to test step
Operate When SER DRIVE or PARK
military light switch.
2.
Functions Are Selected.
2. Check lights for disconnected
Reconnect connectors, if
connections or damage.
required. If any damage to lights
is found, notify Unit
Maintenance. If connectors and
lights are okay, notify Unit
Maintenance.
Select SER DRIVE or PARK. If
1. Ensure SER DRIVE or PARK
8.
High Beams Do Not Come On.
function has been selected on
problem still exists, go to test step
military light switch.
2.
WARNING
Park machine on level ground, stop engine, and lower blade to
prevent injury to operator and/or severe damage to machine.
2. Check for mud and dirt around
Clean mud or dirt from high beam
high beam switch.
switch. If problem still exists,
notify Unit Maintenance.
1. Ensure STOP LIGHT or SER
Select STOP LIGHT or SER
9.
Stoplights Do Not Operate When Brake
DRIVE function has been
DRIVE. If problem still exists, go
Pedal Is Pressed.
selected on military light
to test step 2.
switch.
2. Check lights for disconnected
Reconnect connectors, if
connections or damage.
required. If any damage to lights
is found, notify Unit
Maintenance.
1. Ensure SER DRIVE function
Select SER DRIVE. If problem
10. Taillights Do Not Come On.
still exists, go to test step 2.
has been selected on military
light switch.
2. Check lights for disconnected
Reconnect connectors, if
connections or damage.
required. If problem still exists,
notify Unit Maintenance.
Check fuses at fuse panel (WP
If fuse is blown, request a
11. Windshield Wiper Not Working (if
replacement from Unit
Equipped).
Maintenance. If fuse is okay,
notify Unit Maintenance.
