TM 5-3805-293-23-5
0326
REMOVAL CONTINUED
6. Loosen two nuts (Figure 2, Item 1) and bolts (Figure 2, Item 4) located in upper right and left corner of tiedown
assembly (Figure 2, Item 7).
7. Using lifting device, remove remaining 12 nuts (Figure 2, Item 9), spacers (Figure 2, Item 8), spacers (Figure 2,
Item 5), bolts (Figure 2, Item 6) and tiedown assembly (Figure 2, Item 7) from machine.
8. Lower tiedown assembly (Figure 2, Item 7) onto flat surface.
9. Remove two nuts (Figure 2, Item 1), spacers (Figure 2, Item 2), spacers (Figure 2, Item 3) and bolts (Figure 2,
Item 4) from tiedown assembly (Figure 2, Item 7).
10. Remove sling and lifting device from tiedown assembly (Figure 2, Item 7).
Figure 2. Tiedown Assembly.
0326
END OF TASK
CLEANING AND INSPECTION
000326
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
