TM 5-3805-293-23-5
0303
REMOVAL CONTINUED
Figure 2. Wearstrips.
0303
END OF TASK
CLEANING AND INSPECTION
000303
N OT E
The wearstrips should be in complete contact with the blade circle at all points.
If any wearstrip is not in complete contact with the blade circle, replace the wearstrip.
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Inspect wearstrips and drawbar for wear.
3. Measure thickness of wearstrips, and replace if the difference between ends exceeds 0.2 in. (3 mm).
END OF TASK