TM 5-3805-293-23-2
0035
FUEL INJECTION TIMING CHECK CONTINUED
00035
8. Loosen locking screw (Figure 19, Item 6) on fuel injection pump (Figure 19, Item 5).
9. Slide spacer (Figure 19, Item 7) into unlocked position (narrow end of spacer) under locking screw (Figure 19,
Item 6).
10. Torque locking screw (Figure 19, Item 6) to 80 lb-in (9 Nm). This prevents locking screw from tightening
against shaft. Fuel injection pump is now unlocked.
11. Use timing tool (Figure 19, Item 2) to rotate injection pump shaft (Figure 19, Item 3) until pin (Figure 19, Item 1)
can be engaged into hole on face of fuel injection pump (Figure 19, Item 4).
12. Loosen locking screw (Figure 19, Item 6) on fuel injection pump (Figure 19, Item 5).
13. Slide spacer into locked position (wide end of spacer) under locking screw (Figure 19, Item 6).
14. Torque locking screw (Figure 19, Item 6) to 80 lb-in (9 Nm). Fuel injection pump is now locked.
15. Remove pin (Figure 19, Item 1) and timing tool (Figure 19, Item 2) from fuel injection pump shaft (Figure 19,
Item 3).
16. Install fuel injection pump to front housing (WP 0074).
Figure 19. Fuel Injection Pump Timing.
0035
END OF TASK
