TM 5-3805-293-23-2
0027
Table 1. Implement Code (0615-02 TO 2113-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1558-09 Electronic Imple-
6. Connect harness connector FA-
ment Control #2 Abnormal
C22 (WP 0009, Figure 47) to har-
Update Rate - Continued
ness connector P-C69 (WP 0009,
Figure 46) (WP 0266).
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 8.
nector P-C45 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
72) terminal 13 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 14.
5.0 ohms.
8. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 9.
nector P-C45 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
72) terminal 23 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 14.
5.0 ohms.
9. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 10.
nector P-C45 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
72) terminal 27 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 14.
5.0 ohms.
10. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 11.
nector P-C45 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
72) terminal 32 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 14.
5.0 ohms.
11. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 12.
nector P-C45 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
72) terminal 56 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 14.
5.0 ohms.
12. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
continuity between harness con-
Proceed to step 13.
nector P-C45 (WP 0009, Figure
Resistance More Than 5.0 Ohms -
72) terminal 57 and machine
Replace cab lower wiring harness
ground.
(WP 0266).
Resistance should be less than
Proceed to step 14.
5.0 ohms.
0027-126