TM 5-3805-293-23-2
0027
Table 1. Implement Code (0615-02 TO 2113-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0615-08 Machine Articula-
9. Using MSD (WP 0006) verify
0615-08 was active for the
tion Angle Sensor Abnor-
0615-08 was active for the Trans-
transmission ECM only - Replace
mal Frequency, Pulse Width
mission ECM or the Implement 1
transmission ECM (WP 0137).
or Period - Continued
ECM.
Connect secondary steering harness
connector AT-C3 (WP 0009, Figure
144) to articulation angle position
sensor 1 (left) (WP 0009, Figure 145)
(WP 0257).
Proceed to step 10.
0615-08 was active for the
implement 1 ECM only - Replace
implement 1 ECM (WP 0268).
Connect secondary steering harness
connector AT-C3 (WP 0009, Figure
144) to left articulation angle position
sensor (WP 0009, Figure 145) (WP
0257).
Proceed to step 10.
0615-08 was active for the
transmission ECM and the
implement 1 ECM - Replace
transmission ECM (WP 0137) and
implement 1 ECM (WP 0268).
Connect secondary steering harness
connector AT-C3 (WP 0009, Figure
144) to left articulation angle position
sensor (WP 0009, Figure 145) (WP
0257).
Proceed to step 10.
10. Connect MSD (WP 0006), select
0615-08 Code Active - Repeat
Trans/Chassis 120M and verify
troubleshooting from the beginning of
0615-08 is active.
this diagnostic code.
0615-08 Code Not Active -
Troubleshooting complete.
System Response:
0615-13 Machine Articula-
tion Angle Sensor Out Of
ECM will log a diagnostic code.
0027-32
