TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2194-03 All-Wheel Drive
6. Using a digital multimeter, test for No Continuity - Proceed to Test Step
(AWD) Control Dial Position
continuity between P-C3 terminal 11.
Sensor Voltage Above Nor-
10 (WP 0009, Figure 34) and
Continuity - Proceed to Test Step 13.
mal - Continued
ground. There should be no conti-
nuity.
Test Step 11. Test for Shorted Left
AWD Clutch Pressure Sensor.
1. Using a digital multimeter, test for
No Continuity - Proceed to step 2.
continuity between left AWD
Continuity - Replace Left AWD clutch
clutch pressure sensor connector
pressure sensor (WP 0249).
terminal A and terminal B (WP
Connect AF-C17 (WP 0009, Figure
0009, Figure 92). There should be
94) on right AWD clutch pressure sen-
no continuity.
sor connector (WP 0009, Figure 95).
Connect P-C3 (WP 0009, Figure 34)
on R-C1 (WP 0009, Figure 33) (WP
0266).
Connect P-C42 (WP 0009, Figure 90)
on R-C3 (WP 0009, Figure 91) (WP
0266).
Connect R-C12 (WP 0009, Figure 88)
on AWD control dial position sensor
connector (WP 0009, Figure 89) (WP
0271).
Install new fuse F7 on fuse box.
Install cover on fuse box.
Proceed to step 4.
0013-106