TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2194-03 All-Wheel Drive
2. Using a digital multimeter, mea-
Voltage Within 18-26 Volts - Proceed
(AWD) Control Dial Position
sure for 18-26 volts DC between
to Test Step 7.
Sensor Voltage Above Nor-
fuse F7 bottom terminal (Figure 1)
Voltage Not Within 18-26 Volts -
mal - Continued
and ground.
Replace cab lower wiring harness
(WP 0266).
Connect R-C12 (WP 0009, Figure 88)
on AWD control dial position sensor
connector (WP 0009, Figure 89) (WP
0271).
Install cover on fuse box.
Proceed to step 3.
Figure 1. Fuse F7 Bottom Terminal.
0013
3. Using the MSD (WP 0006), select
2194-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2194-03 is not active.
2194-03 Code Not Active - Trouble-
shooting complete.