TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2194-03 All-Wheel Drive
(AWD) Control Dial Position
Continuity - Replace cab upper wir-
Sensor Voltage Above Nor-
ing harness (WP 0265).
mal - Continued
Install new fuse F7 on fuse box.
91). There should be no continu-
Install cover on fuse box.
ity.
Proceed to step 6.
No Continuity - Proceed to Test Step
10.
Continuity - Replace cab upper wir-
ground. There should be no conti-
ing harness (WP 0265).
nuity.
Install new fuse F7 on fuse box.
Install cover on fuse box.
Proceed to step 6.
2194-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2194-03 is not active.
2194-03 Code Not Active - Trouble-
shooting complete.
Test Step 10. Test 156-YL Power
Circuit for Short to Other Circuits in
Cab Lower Wiring Harness.
1. Remove nose front frame cover
from machine (WP 0224).
2. Disconnect left AWD clutch pres-
Figure 92) from clutch drive sole-
noid AF-C16 harness connector
3. Disconnect right AWD clutch
pressure sensor connector (WP
0009, Figure 94) from clutch drive
Continuity - Proceed to Test Step 13.
10 and all other circuits in P-C3
should be no continuity.
continuity between P-C3 terminal Continuity - Proceed to Test Step 13.
ure 90). There should be no conti-
nuity.
0013-105