TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2194-03 All-Wheel Drive
Install new fuse F7 on fuse box.
(AWD) Control Dial Position
Install cover on fuse box.
Sensor Voltage Above Nor-
Proceed to step 6.
mal - Continued
5. Using a digital multimeter, test for
No Continuity - Replace clutch drive
continuity between P-C3 terminal
solenoid harness (WP 0200).
10 (WP 0009, Figure 34) and
Connect P-C3 (WP 0009, Figure 34)
ground. There should be no conti-
on R-C1 (WP 0009, Figure 33) (WP
nuity.
0266).
Connect P-C42 (WP 0009, Figure 90)
on R-C3 (WP 0009, Figure 91) (WP
0266).
Connect R-C12 (WP 0009, Figure 88)
on AWD control dial position sensor
connector (WP 0009, Figure 89) (WP
0271).
Install new fuse F7 on fuse box.
Install cover on fuse box.
Proceed to step 6.
Continuity - Replace cab lower wiring
harness (WP 0266).
Connect right AWD clutch pressure
sensor (WP 0009, Figure 94) on AF-
C17 (WP 0009, Figure 95).
Connect left AWD clutch pressure
sensor (WP 0009, Figure 92) on AF-
C16 (WP 0009, Figure 93).
Install nose front frame cover on
machine (WP 0224).
Connect R-C12 (WP 0009, Figure 88)
on AWD control dial position sensor
connector (WP 0009, Figure 89) (WP
0271).
Install new fuse F7 on fuse box.
Install cover on fuse box.
Proceed to step 6.
6. Using the MSD (WP 0006), select
2194-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2194-03 is not active.
2194-03 Code Not Active - Trouble-
shooting complete.
0013-111