TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2194-03 All-Wheel Drive
2. Using a digital multimeter, test for
No Continuity - Proceed to step 3.
(AWD) Control Dial Position
continuity between left AWD
Continuity - Replace Left AWD clutch
Sensor Voltage Above Nor-
clutch pressure sensor connector
pressure sensor (WP 0249).
mal - Continued
terminal A and terminal C (WP
Connect AF-C17 (WP 0009, Figure
0009, Figure 92). There should be
94) on right AWD clutch pressure sen-
no continuity.
sor connector (WP 0009, Figure 95).
Connect P-C3 (WP 0009, Figure 34)
on R-C1 (WP 0009, Figure 33) (WP
0266).
Connect P-C42 (WP 0009, Figure 90)
on R-C3 (WP 0009, Figure 91) (WP
0266).
Connect R-C12 (WP 0009, Figure 88)
on AWD control dial position sensor
connector (WP 0009, Figure 89) (WP
0271).
Install new fuse F7 on fuse box.
Install cover on fuse box.
Proceed to step 4.
3. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
continuity between left AWD
12.
clutch pressure sensor connector
Continuity - Replace Left AWD clutch
terminal A (WP 0009, Figure 92)
pressure sensor (WP 0249).
and ground. There should be no
Connect AF-C17 (WP 0009, Figure
continuity.
94) on right AWD clutch pressure sen-
sor connector (WP 0009, Figure 95).
Connect P-C3 (WP 0009, Figure 34)
on R-C1 (WP 0009, Figure 33) (WP
0266).
Connect P-C42 (WP 0009, Figure 90)
on R-C3 (WP 0009, Figure 91) (WP
0266).
Connect R-C12 (WP 0009, Figure 88)
on AWD control dial position sensor
connector (WP 0009, Figure 89) (WP
0271).
Install new fuse F7 on fuse box.
Install cover on fuse box.
Proceed to step 4.
4. Using the MSD (WP 0006), select
2194-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2194-03 is not active.
2194-03 Code Not Active - Trouble-
shooting complete.
0013-107