TM 5-3805-263-14&P-3
OPERATOR'S STATION
TRANSMISSION CONTROL
10
Install magnet assembly (22) on plate assembly
(23).
11
Put rod assembly (25) in position on lever (24)
and install washer and nut.
12
Install shaft (26) and bearings (27) in lever.
13
Put lever assembly in position on shaft (12). Put
plate assembly (23) in position and install bolt (28)
to fasten the lever shaft and plate assembly
together.
14
Put rod assembly (25) in position and install bolt to
fasten shaft to rod assembly.
15
Put the housing and lever assembly in position on
plate. Fasten the housing to plate with four bolts
(29). Make sure shaft (14) is in alignment with
bracket (5).
4-81
