TM 5-3805-263-14&P-3
OPERATOR'S STATION
TRANSMISSION CONTROL
ASSEMBLE TRANSMISSION CONTROL
Tools Needed
A
B
1P510
Driver Group
1
1P1853
Pliers
1
1
Put rod and spring assembly (2) in position on
bracket. Install washers (1) on each side of
bracket. Install pin (3) and cotter pin.
2
Install bearing (4) even with the edge of bracket (5)
with tool (A).
3
Put bracket assembly in position on plate (6).
Install two bolts (7).
4
Install spiral snap rings (8) in position in housing.
Install bearings (9).
5
Put levers (10) and (11 ) in position in housing.
4-79
