TM 5-3805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
TRANSMISSION CONTROL
6
Install bearings (13) and (15) on shafts (12) and
(14). Make sure the bearings are against the
shoulder of the shafts. Install keys.
7
Install shafts (12) and (14) in housing.
8
Install washer and bolts (16) in shafts. Tighten
bolts to a torque of 25 + 5 lb. ft. (35 + 7 N.m).
9
Install filter (18), magnet (19) and cover (20) into
the magnetic holder (17). Install ring (21 ) with
tool (B).
NOTE: North pole (part number) of the magnet (19)
must be assembled toward the ring and cover.
4-80
