TM 5-3805-263-14&P-3
OPERATOR'S STATION
TRANSMISSION CONTROL
8
Remove nut and rod assembly (17) from lever
assembly. Remove two bearings (18) and shaft
from lever.
9
Remove nut and magnetic assembly (19) from
plate assembly.
10
Remove ring (23) from assembly with tool (A).
Remove cover (22), magnet (21 ) and filter (20)
from housing.
11
Remove two bolts (24) and washers from housing.
12
Use a hammer and a punch to remove shaft
assemblies from housing.
4-77
