TM 5-3805-263-14&P-3
DISASSEMBLY AND ASSEMBLY
TRANSMISSION CONTROL
DISASSEMBLE TRANSMISSION CONTROL
Tools Needed
A
1P 1853
Pliers
1
start by:
a) remove transmission control
1
Remove bolt (I) from alarm bracket.
Remove
alarm (2).
2
Remove nut (3) and the backup alarm switch (4)
from bracket.
3
Remove knob (6) and gate plate (5) from console.
NOTE: A spring mounting bracket is held in position
by bolt (9).
4
Loosen bolt (9) so spring (7) can be removed.
Remove spring (7). Remove lever assembly (8)
from plate assembly (10).
5
Remove four bolts (11) that are used to fasten
housing (12) to the plate assembly. Remove the
lever arm and housing assembly from plate
assembly (10).
6
Remove bolt (16) and rod assembly (17) from
shaft assembly.
7
Remove bolt (14). Remove plate assembly (15)
and lever assembly (13) from shaft assembly.
4-76
