TM 5-3805-263-14&P-3
OPERATOR'S STATION
STEERING WHEEL
REMOVE AND INSTALL STEERING WHEEL
Tools Needed
A
1P70
Head
1
5F7345
Screw
1
2B8593
Bolt ('/4"-28 NF x 2 %" long)
2
4B4276
Washer
2
1
Remove three screws (1) and cover (2). Remove
button, gasket and spring.
2
Remove nut (3) from shaft assembly.
3
Install tooling (A) to remove steering wheel (4)
from the shaft assembly.
4
Put steering wheel (4) in position on the shaft
assembly and install nut (3). Tighten nut to a
torque of 44 + 4 lb.ft. (60 + 5 N.m).
5
Put gasket, spring and button in position and
install cover (2) on the steering wheel.
4-85
