TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont)
14-2.
Transmission Assembly. (Sheet 10 of 20)
DISSASEMBLY (cont)
56. Remove roller bearing (58),
spacer (59), two bearing cups
(60), spacer (61), retaining ring
(62), drum gear (63) and roller
bearing (64, Figure 14-17).
57. Remove items 65 thru 68 as an
assembly from shaft (84).
58. Remove plate (65) from piston
clutch (68, Figure 14-18).
59. Remove and discard seal ring (66)
and preformed packing (67).
NOTE
All springs must be tagged
before removal to aid in
installation.
60. Remove plate (69), six springs
(70), discs (71) and plates (72,
Figure 14-19).
61. Turn over items 73 thru 84 as an
assembly and place on wood
blocks.
62. Remove eight bolts (73), transfer
gear (74), preformed packing (75)
and hub (76, Figure 14-20).
Discard preformed packine (75).
Go to Sheet 11
14-12
Figure 14-17.
Figure 14-18.
Figure 14-20.
Figure 14-19.
