TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont)
14-2.
Transmission Assembly. (Sheet 6 of 20)
DISASSEMBLY (cont)
WARNING
Weight of cover is approxi-
mately 74 lbs. Use adequate
hoist and sling for lifting.
Failure to follow this
procedure may cause INJURY.
If you are injured, seek
medical aid immediately.
26. Attach hoist and sling to
3/8-16NC forged eyebolts.
27. Evenly and gradually tighten
three forcing screws and remove
cover (28).
28. Remove hoist and sling.
29. Remove two 3/8-16NC forged
eyebolts.
30. Remove three 1/2-13NC forcing
screws.
31. Remove and discard preformed
packings (29, 30 and 31).
32. Remove items 32 thru 34 as an
assembly (Figure 14-7).
33. Using a puller assembly, ratchet
box wrench, bearing pulling
attachment and drive plate,
remove roller bearings (32 and
33) from input gear (34, Figure
14-8).
Go to Sheet 7
14-8
Figure 14-6.
Figure 14-7.
Figure 14-8.
