TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-2.
Transmission Assembly. (Sheet 5 of 20)
DISASSEMBLY
16. Remove guide (18) from gear (34,
Figure 14-5).
17. Remove six bolts (19) and washers
(20) from bearing cage (21).
18. Install two 3/8-16NC forcing
screws in bearing cage (21).
NOTE
To aid in assembly, keep all
shim packs together with
bearing cages from which they
were originally removed.
19. Evenly and gradually tighten two
3/8-16NC forcing screws and
remove bearing cage (21) and shim
pack (22).
20. Remove two 3/8-16NC forcing
screws.
21. Remove bearing cup (23).
22. Remove 12 bolts (24) and washers
(25, Figure 14-6).
23. Remove two plugs (26) and
preformed packings (27) from
cover (28). Discard two
preformed packings (27).
24. Install three 1/2-13NC forcing
screws in cover (28).
25. Install two 3/8-16NC forged
eyebolts in cover (28).
Go to Sheet 6
14-7
Figure 14-5.
Figure 14-6.
