TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-17.
Blade Lift Cylinder. (Sheet 3 of 6)
REMOVAL
7.
Remove fitting (14, Figure
10-130).
8.
Remove two bolts (15) and
lockwashers (16).
9.
Remove cap (17), two shim(s)
(18), inserts (19) and shim(s)
(20). Tie shim(s) (18 and 20)
together and tag for
identification.
WARNING
Weight of blade lift cylinder
is approximately 175 lbs.
Use adequate hoist and sling
for lifting. Failure to
follow this procedure may
cause INJURY. If you are
injured, seek medical aid
immediately.
10
Attach hoist and sling to
cylinder (27). Remove slack from
sling.
11.
Remove four bolts (21) and
washers (22, Figure 10-131).
12.
Remove two caps (23).
CAUTION
Be sure work surface is
padded to avoid damaging
sleeve bearings.
13.
Remove items 24 thru 27 as an
assembly. Lower cylinder (27)
onto work surface.
Figure 10-130.
Figure 10-131.
Go to Sheet 4
10-99