TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-16.
Blade Tip Cylinder. (Sheet 5 of 6)
INSTALLATION (cont)
5.
Install pin (11, Figure 10-126).
6.
Install bolt (10).
7.
Position two spacers (9). Align
spacers (9) with hole through
seals (12).
8.
Install pin (8) by pushing
carefully through spacers (9).
Use care not to damage seals
(12).
9.
Install new cotter pin (7) in pin
(8).
10.
Remove hoist and sling.
11.
Install new preformed packing (6)
and elbow (5).
12.
Connect hose assembly (4) to
elbow (5).
13.
Install new preformed packing (3)
and connector (2).
14. Connect hose assembly (1).
Figure 10-126.
Go to Sheet 6
10-95
