HYDRAULIC SYSTEM MAINTENANCE. (cont)

HYDRAULIC SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34_732

HYDRAULIC SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34_734

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
686

TM 5-3805-261-34 HYDRAULIC SYSTEM MAINTENANCE. (cont) 10-18. Articulation Cylinder. (Sheet 2 of 6) REMOVAL NOTE The following is a mainte- nance procedure for the left articulation cylinder. The maintenance procedure for the right articulation cylinder is identical, except for step 1. 1. Remove radiator to coolant pump outlet pipe on inner left side of engine compartment. Refer to TM 5-3805-261-20. NOTE All hose and tube assemblies must be tagged before disconnecting to aid in installation. Cap all hose and tube ends to prevent contamination. 2 Disconnect hose assembly (1, Figure 10-136) from center left side of vehicle. 3. Remove connector (2) and performed packing (3). Discard preformed packing (3). 4 Disconnect hose assembly (4). 5. Remove connector (5) and preformed packing (6). Discard preformed packing (6). 6. Remove bolt (7), lockwasher (8) and washer (9) from rear, left side of front frame. Figure 10-136. Go to Sheet 3 10-104

Privacy Statement
Press Release
Contact