TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-16.
Blade Tip Cylinder. (Sheet 4 of 6)
INSTALLATION
CAUTION
Seals can be damaged by
careless handling during
installation. Driving tools
must not strike bearings or
rings which remain in rod and
cap of cylinder assembly.
1.
Using suitable driver and hammer,
install two new seals (13) with
lips toward outside and even with
outer surface of eye of rod (14)
on cylinder (16, Figure 10-128).
2.
Install two new seals (12) in cap
(15) of cylinder (16).
3.
Attach hoist and sling to
cylinder (16).
4.
Using hoist and sling, position
items 16 thru 12 as an assembly
(Figure 10-127). Remove slack
from sling.
Figure 10-128.
Figure 10-127.
Go To Sheet 5
10-94
