TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-16.
Blade Tip Cylinder. (Sheet 6 of 6)
INSTALLATION (cont)
WARNING
Only a qualified operator may
perform the next procedure.
Failure to follow this proce-
dure may cause INJURY. If
you are injured, seek medical
aid immediately.
15.
Connect battery negative ground.
Refer to TM 5-3805-261-20.
16.
Start engine. Refer to TM 5-
3805-261-10.
17.
Operate blade tip control. Move
cylinder (16) through at least
five full movements of travel to
bleed air from system.
18.
Stop engine.
19.
Inspect hose assemblies and
cylinder (16) on rear of blade
for leaks.
NOTE
Return 130C Grader to
original equipment condition.
End of Task
10-96
