TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE.
3-25.
Fuel Injection Pump. (Sheet 12 of 16)
ASSEMBLY
19. Install deflector (36) and two
bolts (35) on cover (33, Figure
3-90).
20. Position new gasket (34) and
cover (33).
21. Install four bolts (32), two
bolts (31), washers (30) and
bolts (29).
22. Install four spacers (28).
NOTE
The following maintenance
procedure is for one pump
assembly. The maintenance
procedure for the remaining
three pump assemblies is
identical.
23. Install spring (26) and check
(25) in bonnet (27, Figure 3-89).
CAUTION
Do not slide bonnet across
barrel. Check in bonnet will
cause damage to face of
barrel.
24. Position barrel (24) on bonnet
(27).
25. Install ring (23), securing
bonnet (27) to barrel (24).
26. Install spring (22) on barrel
(24).
Go to Sheet 13
3-127
Figure 3-90.
Figure 3-89.
