TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE.
3-25.
Fuel Injection Pump. (Sheet 14 of 16)
ASSEMBLY
33. Install four bushings (18, Figure
3-97) and tighten to 120 ft-lb
torque.
34. Install four new felt washers
(17).
35. Install new gasket (16), cover
(15) and four bolts (14).
INSTALLATION
1.
Install governor assembly on
injection pump. Refer to
paragraph 3-28.
2.
Lubricate and install new
preformed packings (13 thru 10)
under fuel injection pump and
governor (Figure 3-85).
3.
Using hoist and sling, position
fuel injection pump and governor
on support and timing gear plate.
4.
Install bolts (9 and 8).
5.
Remove hoist and sling.
Go to Sheet 15
3-129
Figure 3-85.
Figure 3-97.