TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE. (cont)
3-25.
Fuel Injection Pump. (Sheet 7 of 16)
DISASSEMBLY (cont)
14. Remove four spacers (28) from
each of four cylinders in pump
housing (53, Figure 3-90).
15. Remove two bolts (29), washers
(30), bolts (31), four bolts
(32), cover (33) and gasket (34).
Discard gasket (34). Remove all
gasket material from mounting
surfaces.
16. Remove two bolts (35) and
deflector (36) from cover (33).
17. Remove items 37 thru 53 as an
assembly.
18. Remove rack (37) from housing
(53, Figure 3-91).
19. Using a magnet, remove four
lifters (38).
20. Using snap ring pliers, remove
ring (39).
CAUTION
Do not allow camshaft to fall
or become scratched when
removing. Scratches to
machined surfaces will cause
destruction of camshaft.
21. Using plastic hammer, drive
camshaft (41) free of washer (40)
and separate. Do not allow
camshaft (41) to drop.
22. Remove washer (40).
23. Remove camshaft (41) from rear of
housing (53).
Go to Sheet 8
3-122
Figure 3-90.
Figure 3-91.
