TM 5-3805-261-34
ENGINE MAINTENANCE.
3-9. Cylinder Head Assembly. (Sheet 8 of 8)
INSTALLATION
13.
Position new gaskets (14 and 13) and elbow
(12, Figure 3-36) to left front of engine.
14.
Install two bolts (11) and bolts (10 and 9).
15.
Position hose (8) and two clamps (39) to left
side of engine. Slide up pipe (40, Figure 3-35)
onto neck of elbow (12).
16.
Tighten two clamps (39).
17.
Install bushing (7), connector (6) and tube
assembly (5).
18.
Install elbow (4) and connect hose assembly
(3).
19.
Install atomizer (2) to top left of cylinder head
(18).
20.
Install tube (1) to tube assembly (37) and
atomizer (2).
21.
Remove hoist and sling.
NOTE
Return 130G Grader to original
equipment condition.
Figure 3-35.
End of Task
3-57
