TM 5-3805-261-34
3-9. Cylinder Head Assembly. (Sheet 7 of 8)
INSTALLATION (cont)
5.
Install 14 washers (17), bolts (16) and five
bolts (15) loosely into cylinder head (18, Figure
3-36). Lubricate five bolts (15) threads with
clean oil.
6.
Install rocker arm assembly. Refer to
paragraph 3-12.
7.
Tighten cylinder head (18, Figure 3-39) bolts A
thru R in letter sequence to 115 ft-lb torque.
8.
Tighten bolts A thru R in letter sequence to
185 ft-lb torque.
9.
Tighten bolts A thru R again in letter sequence
to 185 ft-lb torque.
10.
Tighten bolts S thru W in letter sequence to 32
ft-lb torque.
11.
Tighten bolts S thru W again in letter
sequence to 32 ft-lb torque.
12.
Adjust valves. Refer to paragraph 3-12.
Figure 3-39.
Go to Sheet 8
3-56
Figure 3-36.
