TM 5-3805-261-34
ENGINE MAINTENANCE.
3-9. Cylinder Head Assembly. (Sheet 4 of 8)
REMOVAL
WARNING
Weight of cylinder head assembly is
approximately 129 pounds. Use
adequate hoist and sling for lifting.
Failure to follow this procedure may
cause INJURY. If you are injured, seek
medical aid immediately.
13.
Attach hoist and sling to plates (29 and 32,
Figure 3-37).
14.
Using hoist and sling, remove items 18 thru 37
as an assembly from engine.
CAUTION
Do not lay machined surfaces of
cylinder head on an unprotected
surface. Concrete or metal surfaces can
scratch and cause damage to the
cylinder head.
15.
Remove hoist and sling.
16.
Remove and discard gasket (19), preformed
packing (20), four seals (21) and 12 seals (22)
from top of engine. Remove all gasket
material from mounting surfaces.
17.
Inspect four cylinder liners projection and bore.
Refer to paragraph 3-7.
Go to Sheet 5
3-53
Figure 3-37.
