TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
3-9. Cylinder Head Assembly. (Sheet 5 of 8)
DISASSEMBLY
1.
Remove four bolts (23), washers (24), cover
(25) and gasket (26, Figure 3-38). Discard
gasket (26). Remove all gasket material from
mounting surfaces.
NOTE
Plates can remain attached to cylinder
head to aid in easy handling.
2.
Remove two bolts (27), washers (28) and plate
(29).
3.
Remove two bolts (30), washers (31) and plate
(32).
4.
Remove three plugs (33).
5.
Remove and discard four plugs (34 and 35)
and eight plugs (36). Drill hole through plugs
(36) and pry out.
6.
Remove and discard 12 directors (37).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 3-38.
Go to Sheet 6
3-54
