TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
3-11. Flywheel and Flywheel Housing. (Sheet 3 of 5)
REMOVAL (cont)
8.
Install FT121 lifting bracket and 3/8-16-2B
THD bolt to flywheel housing (6, Figure 3-42).
WARNING
Weight of flywheel housing is approximately 86
pounds. Use adequate hoist and sling for lifting.
Failure to follow this procedure may cause
INJURY. If you are injured, seek medical aid
immediately.
9.
Attach hoist and sling to flywheel housing (6).
10.
Remove 13 bolts (5).
11.
Remove flywheel housing (6) and gasket (7).
Discard gasket (7). Remove all gasket
material from mounting surfaces.
12.
Remove hoist and sling and FT121 lifting
bracket.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 3-42.
Go to Sheet 4
3-62
