TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
3-7.
Timing Gears and Plate. (Sheet 3 of 9)
REMOVAL (cont)
5.
Turn crankshaft and camshaft so
the "C" marks are in alignment on
gear (9, Figure 3-23) and crank-
shaft gear.
CAUTION
Do not turn crankshaft after cam-
shaft gear has been removed.
Failure to follow this procedure
will result in valve damage.
6.
Remove four bolts (8) and gear
(9, Figure 3-24).
7.
Remove three nuts (10) and
washers (11) from studs that hold
the fuel injection pump housing
to plate (13, Figure 3-25).
Go to Sheet 4
Figure 3-23.
Figure 3-24.
Figure 3-25.
3-40
