TM 5-3805-261-34
ENGINE MAINTENANCE.
3-6.
Engine Front Covers. (Sheet 4 of 4)
INSTALLATION
5.
Install two bolts (14), bolts
(15), washers (17) and nuts (16).
NOTE
Tighten bolts (1, Figure 3-18) to
17 + 3 lb ft torque.
6.
Position new gasket (13) and cover
(12).
7.
Install six washers (11) and nuts
(10).
8.
Position new preformed packing
(8), cover (7), two washers (6)
and bolts (5, Figure 3-16).
9.
Remove spacer (9) from between oil
pan plate and engine block on each
side of engine.
10.
Connect hose assembly (4, Figure 3-
15) to fuel priming pump.
11.
Install clip (3), washer (2) and
bolt (1).
End of Task
Figure 3-17.
Figure 3-18.
Figure 3-16
Figure 3-15.
3-37
