REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
794

TM 5-3805-261-20 BODY, CAB, HOOD AND HULL MAINTENANCE. 13-10. Cab Doors and Latch Assemblies. (Sheet 3 of 9) REMOVAL 11. Remove 14 screws (18), nuts (19) and washers (20). 12. Using hoist and sling, remove items 21 thru 64 as an assembly. 13. Remove hoist and sling. NOTE • Steps 13 thru 32 of this removal procedure is for the left door components. The removal procedure for the right door components is identical. • Remove rivets, hinge and seals only if inspection indicates replacement is necessary. 14. Remove 14 rivets (21), hinge (22), seals (23 and 24, Figure 13-34), if necessary. Discard 14 rivets (21) and seals (23 and 24). Remove all old adhesive and seal material from mounting surfaces. 15. Remove plug (25). 16. Remove two nuts (26), plate (27), two bolts (28) and handle (29). 17. Remove three screws (30) and cover (31, Figure 13-35). 18. Remove cotter pin (32), two screws (33) and handle (34). Discard cotter pin (32). Figure 13-34. Figure 13-35. Go to Sheet 4 13-37

Privacy Statement
Press Release
Contact