TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
13-10.
Cab Doors and Latch Assemblies. (Sheet 7 of 9)
INSTALLATION
9.
Install bolt (58), washer (57) and nut (56).
10.
Install bolt (55), plate (54), washer (53) and
nut (52, Figure 13-37).
11.
Install link (51), washer (50), arm (49),
washer (48) and new cotter pin (47).
12.
Install spring (46) on plate (54) and latch
(62, Figure 13-36).
13.
Install handle (45), two screws (44) and new
cotter pin (43).
14.
Install pin (42), washer (41) and new cotter
pin (40).
15.
Install link assembly (39), washer (38), pin
(37), washer (36) and new cotter pin (35,
Figure 13-35).
16.
Install handle (34), two screws (33) and new
cotter pin (32).
17.
Install cover (31) and three screws (30).
Tighten three screws (30) to 79 lb.-in
torque.
Figure 13-37.
Figure 13-36.
Figure 13-35.
Go to Sheet 8
13-41
